Cpuset Management Utilty/proc writeup

From RTwiki
(Difference between revisions)
Jump to: navigation, search
(Usage: <code>cset proc [options] [path/program [args]]</code>)
m
Line 53: Line 53:
 
Note that the move command will not move kernel threads unless the -k/--kthread switch is specified. If it is, then all unbound kernel threads will be added to the move. Unbound kernel threads are those that can run on any CPU. If you also specify the -a/--all switch, then all tasks, kernel or not, bound or not, will be moved.
 
Note that the move command will not move kernel threads unless the -k/--kthread switch is specified. If it is, then all unbound kernel threads will be added to the move. Unbound kernel threads are those that can run on any CPU. If you also specify the -a/--all switch, then all tasks, kernel or not, bound or not, will be moved.
  
CAUTION: Please be cautious with the --all switch, since moving a kernel thread that is bound to a specific CPU to a cpuset that does not include that CPU can cause a system hang.
+
'''CAUTION:''' Please be cautious with the --all switch, since moving a kernel thread that is bound to a specific CPU to a cpuset that does not include that CPU can cause a system hang.
  
 
You must specify unique cpuset names for the both exec and move commands. If a simple name passed to the --fromset, --toset and --set parameters is unique on the system then that command executes. However, if there are multiple cpusets by that name, then you will need to specify which one you mean with a full path rooted at the base cpuset tree.
 
You must specify unique cpuset names for the both exec and move commands. If a simple name passed to the --fromset, --toset and --set parameters is unique on the system then that command executes. However, if there are multiple cpusets by that name, then you will need to specify which one you mean with a full path rooted at the base cpuset tree.

Revision as of 00:13, 8 May 2008

Back up to the cpuset page

Usage: cset proc [options] [path/program [args]]

This command is used to run and manage arbitrary processes on specified cpusets. It is also used to move pre-existing processes and threads to specified cpusets. You may note there is no "kill" or "destroy" option — use the standard OS ^C or kill commands for that.

To list which tasks are running in a particular cpuset, use the --list command.

For example:

   # cset proc --list --set priset

This command will list all the tasks running in the cpuset called "priset".

Processes are created by specifying the path to the executable and specifying the cpuset that the process is to be created in.

For example:

   # cset proc --exec --set=blazing_cpuset /usr/bin/fast_code

This command will execute the /usr/bin/fast_code program on the "blazing_cpuset" cpuset.

The move command accepts multiple common calling methods. The PIDSPEC argument taken for the move command is a comma separated list of PIDs or TIDs. The list can also include brackets of PIDs or TIDs (i.e. tasks) that are inclusive of the endpoints.

For example:

   1,2,5               Means processes 1, 2 and 5
   1,2,600-700         Means processes 1, 2 and from 600 to 700

Note that the range of PIDs or TIDs does not need to have every position populated. In other words, for the example above, if there is only one process, say PID 57, in the range of 50-65, then only that process will be moved.

To move a PIDSPEC to a specific cpuset, you can either specify the PIDSPEC with --pid and the destination cpuset with --toset, or use the short hand and list the cpuset name after the PIDSPEC for the --move arguments.

For example, the following commands are equivalent:

   # cset proc --move 2442,3000-3200 reserved_set
   # cset proc --move --pid=2442,3000-3200 --toset=reserved_set

These commands move the tasks defined as 2442 and any running task between 3000 and 3200 inclusive of the ends to the cpuset called "reserved_set".

Specifying the --fromset is not necesary since the tasks will be moved to the destination cpuset no matter which cpuset they are currently running on.

Note however that if you do specify a cpuset with the --fromset option, then only those tasks that are both in the PIDSPEC *and* are running in the cpuset specified by --fromset will be moved. I.e., if there is a task running on the system but not in --fromset that is in PIDSPEC, it will not be moved.

To move all userspace tasks from one cpuset to another, you need to specify the source and destination cpuset by name.

For example:

   # cset proc --move --fromset=comp1 --toset=comp42

This command specifies that all processes and threads running on cpuset "comp1" be moved to cpuset "comp42".

Note that the move command will not move kernel threads unless the -k/--kthread switch is specified. If it is, then all unbound kernel threads will be added to the move. Unbound kernel threads are those that can run on any CPU. If you also specify the -a/--all switch, then all tasks, kernel or not, bound or not, will be moved.

CAUTION: Please be cautious with the --all switch, since moving a kernel thread that is bound to a specific CPU to a cpuset that does not include that CPU can cause a system hang.

You must specify unique cpuset names for the both exec and move commands. If a simple name passed to the --fromset, --toset and --set parameters is unique on the system then that command executes. However, if there are multiple cpusets by that name, then you will need to specify which one you mean with a full path rooted at the base cpuset tree.

For example, suppose you have the following cpuset tree:

   /group1
       /myset
       /yourset
   /group2
       /myset
       /yourset

Then, to move a process from myset in group1 to yourset in group2, you would have to issue the following command:

    # cset proc --move --pid=50 --fromset=/group1/myset \
         --toset=/group2/yourset

Options:

 -l, --list            list processes in the specified cpuset
 -e, --exec            execute arguments in the specified cpuset
 -u USER, --user=USER  use this USER to --exec (id or name)
 -g GROUP, --group=GROUP
                       use this GROUP to --exec (id or name)
 -m, --move            move specified tasks to specified cpuset; to move a
                       PIDSPEC to a cpuset, use -m PIDSPEC cpuset; to move
                       all tasks specify --fromset and --toset
 -p PIDSPEC, --pid=PIDSPEC
                       specify pid or tid specification
 -s CPUSET, --set=CPUSET
                       specify name of immediate cpuset
 -t TOSET, --toset=TOSET
                       specify name of destination cpuset
 -f FROMSET, --fromset=FROMSET
                       specify name of origination cpuset
 -k, --kthread         move, or include moving, unbound kernel threads
 -a, --all             force all processes and threads to be moved
 -v, --verbose         prints more detailed output, additive
 -h, --help            show this help message and exit

Back up to cpuset page.

Personal tools