Cpuset Management Utility/set writeup

From RTwiki
Revision as of 23:26, 7 May 2008 by Alext (Talk | contribs)

Jump to: navigation, search

Back up to cpuset page.

Usage: cset set [options] [cpuset name]

This command is used to create, modify, and destroy cpusets. Cpusets form a tree-like structure rooted at the root cpuset which always includes all system CPUs and all system memory nodes.

A cpuset is an organizational unit that defines a group of CPUs and a group of memory nodes where a process or thread (i.e. task) is allowed to run on. For non-NUMA machines, the memory node is always 0 (zero) and cannot be set to anything else. For NUMA machines, the memory node can be set to a similar specifcation as the CPU definition and will tie those memory nodes to that cpuset. You will usually want the memory nodes that belong to the CPUs defined to be in the same cpuset.

A cpuset can have exclusive right to the CPUs defined in it. This means that only this cpuset can own these CPUs. Similarly, a cpuset can have exclusive right to the memory nodes defined in it. This means that only this cpuset can own these memory nodes.

Cpusets can be specified by name or by path; however, care should be taken when specifying by name if the name is not unique. This tool will generally not let you do destructive things to non-unique cpuset names.

Cpusets are uniquely specified by path. The path starts at where the cpusets filesystem is mounted so you generally do not have to know where that is. For example, so specify a cpuset that is called "two" which is a subset of "one" which in turn is a subset of the root cpuset, use the path "/one/two" regardless of where the cpusets filesystem is mounted.

When specifying CPUs, a so-called CPUSPEC is used. The CPUSPEC will accept a comma-separated list of CPUs and inclusive range specifications. For example, --cpu=1,3,5-7 will assign CPU1, CPU3, CPU5, CPU6, and CPU7 to the specified cpuset.

Note that cpusets follow certain rules. For example, children can only include CPUs that the parents already have. If you do not follow those rules, the kernel cpuset subsystem will not let you create that cpuset. For example, if you create a cpuset that contains CPU3, and then attempt to create a child of that cpuset with a CPU other than 3, you will get an error, and the cpuset will not be active. The error is somewhat cryptic in that it is usually a "Permission denied" error.

Memory nodes are specified with a MEMSPEC in a similar way to the CPUSPEC. For example, --mem=1,3-6 will assign MEM1, MEM3, MEM4, MEM5, and MEM6 to the specified cpuset.

Note that if you attempt to create or modify a cpuset with a memory node specification that is not valid, you may get a cryptic error message, "No space left on device", and the modification will not be allowed.

When you destroy a cpuset, then the tasks running in that set are moved to the parent of that cpuset. If this is not what you want, then manually move those tasks to the cpuset of your choice with the 'cset proc' command (see 'cset proc --help' for more information).

EXAMPLES

Create a cpuset with the default memory specification:

    # cset set --cpu=2,4,6-8 --set=new_set

This command creates a cpuset called "new_set" located off the root cpuset which holds CPUS 2,4,6,7,8 and node 0 (interleaved) memory. Note that --set is optional, and you can just specify the name for the new cpuset after all arguments.

Create a cpuset that specifies both CPUs and memory nodes:

    # cset set --cpu=3 --mem=3 /rad/set_one

Note that this command uses the full path method to specify the name of the new cpuset "/rad/set_one". It also names the new cpuset implicitily (i.e. no --set option, although you can use that if you want to). If the "set_one" name is unique, you can subsequently refer to is just by that. Memory node 3 is assigned to this cpuset as well as CPU 3.

The above commands will create the new cpusets, or if they already exist, they will modify them to the new specifications.

Options

 -l, --list            list the named cpuset(s); recursive list if also -r;
                       members if also -a
 -c CPUSPEC, --cpu=CPUSPEC
                       create or modify cpuset in the specified cpuset with
                       CPUSPEC specification
 -m MEMSPEC, --mem=MEMSPEC
                       specify which memory nodes to assignto the created or
                       modified cpuset
 -d, --destroy         destroy specified cpuset
 -s CPUSET, --set=CPUSET
                       specify cpuset
 -a, --all             also do listing of member cpusets
 -r, --recurse         do recursive listing, for use with --list
 -v, --verbose         prints more detailed output, additive
 --cpu_exclusive       mark this cpuset as owning its CPUs exclusively
 --mem_exclusive       mark this cpuset as owning its MEMs exclusively
 -h, --help            show this help message and exit


Back up to cpuset page.

Personal tools